Skip to main content

How to divert your mobile on EE, O2, Vodafone and Three

The standard divert codes for UK mobiles, what each one does, how to cancel and check them, and the settings to look for on iPhone and Android.

Diverts without changing your number

A divert sends calls to another number when you cannot take them. Your customers still ring the number on your van; the divert decides where the call goes if you do not answer. There are two kinds:

  • an unconditional divert sends every call elsewhere, so your phone does not ring at all
  • a conditional divert sends a call elsewhere only when you do not answer, are busy on another call, or have no signal

For a working tradesperson, the conditional diverts are usually the ones you want: you still answer when you can.

The codes

These are the standard GSM codes. EE, O2, Vodafone and Three use them, as do most networks that run on their masts. Type the code into the phone app as if it were a number, replacing NUMBER with the number to divert to (start it with 0 or +44), and press call.

  • Divert when you do not answer: **61*NUMBER#
  • Divert when you are busy on another call: **67*NUMBER#
  • Divert when your phone is off or has no signal: **62*NUMBER#
  • All three of the above at once: **004*NUMBER#
  • Divert every call: **21*NUMBER#
  • Cancel every divert: ##002#
  • Check where unanswered calls go: *#61#

The phone shows a message confirming the divert. Some networks let you set how long the phone rings before a no-answer divert kicks in; ask yours how.

Before you set one up: three things to check

  1. Charges. Your network sets its own price for diverted calls, and it depends on your plan and where the calls go. Check your plan or ask your network before you rely on a divert.
  2. Voicemail. Your voicemail works by using the same no-answer divert. Setting your own replaces it, and cancelling every divert with ##002# can switch voicemail off too. Your network can tell you the code to put voicemail back.
  3. Business plans. Some business accounts manage diverts in an online portal instead of by code. If a code is refused, that is the likely reason.

On an iPhone or Android phone

On an iPhone, the Call Forwarding switch in the Phone settings diverts every call. For the conditional diverts above, use the codes.

On Android, look in the phone app’s settings for Calls, Supplementary services or Call forwarding. The menus differ between makers, but most offer the same four options: every call, when busy, when unanswered and when unreachable.

Test it

Ring your mobile from another phone and let it ring out. You should hear wherever you diverted to. Then put your phone into flight mode and ring again to test the no-signal divert. Do this once a month: a network change or a new SIM can quietly reset diverts.

Landlines

Most UK landline providers offer call diversion too, often with similar short codes, but the codes and charges vary. Check with your provider.

If you use Trades AI Operator, setup gives you one divert code to dial, and you can switch it off at any time.

How to divert your mobile on EE, O2, Vodafone and Three | Trades AI Operator